奧派亚游集团

最新消息誠聘英才聯係亚游集团

電地暖工程

首頁>>采暖係統>>電地暖工程

 亚游集团發熱電纜地麵輻射供暖係統設計依據:(1)Ⅸ采曖通風與空氣調節設計規範》、(2)《居住建築節能設計標準>、(3)《民用建築節能設計標準>、(4)《民用建築熱工設計規範>、(5)《地麵輻射暖技術規程》

 

1在找平的地麵上鋪設一層密度≥25Kg/m3 的阻燃保溫苯板。
2.在苯板上鋪設一層鋁箔,鋁箔上鋪設鋼絲網。
3.根據發熱電纜安裝設計圖,在鋼絲網上,從電源接線端開始鋪設發熱電纜,並用固定安裝帶固定。
4.澆注水泥砂漿,使之均勻覆蓋地熱電纜,其厚度≥30mm(或按設計圖紙施工)。
5.測量發熱電纜的絕緣電阻和通路。
6.在水泥養護期滿後鋪設麵層材料。

1 .Pave a tlame retardant and insulahon benzene board with the density> 25kg/m3 at flat ground
2.Pave a layer of aluminum foil on benzene board. lay steelh mesh on the aluminum foil
3.Design the bluepnnt according to the layout of the geothermalheating cable. pave the heating cable from the powertrmina1 0nthe Slee meSh and mXWllh nXedlnSbllallOn belt.
4.Pouring cement mortar to make it equaiity coverthe geothermal heabng cables with thickness of≥ 30mm(or according to the design blueprint)
5.Measure the insulation resistance and pathWay of geothermal heating Cable

 

1.在找平的地麵上鋪設一層密度≥25kg/m3 的阻燃保溫苯板。
2.在保溫苯板上鋪設異形保溫苯板。
3.根據發熱電纜布置設計圖紙,在異形保溫苯板上安置好電纜嵌件,並從電源接線端開始鋪設發熱電纜。
4.測量發熱電纜的絕緣電阻和通路,並按相關接線圖連接好電纜和溫控器
5.在電纜上麵鋪設鍍鋅板,並用鉚釘將各鍍鋅板固定在一起。
6.鋪上強化木地板後,地熱采暖即可投入使用。
1. Pave a flame-retardant and insulation benzene board with the density≥25kg/m' at a flat ground
2.Pave special-shaped insulation benzene board on the insulation benzene board
3.Design the blueprint accoring to the layout of the geothermal heating cable.resettlement the insert in the special-shaped insulation benzene board and pave the heating cable from the power terminal
4.Measure the insulation resistance and pathway of geothermal heating cable. connect the cable and temperaturecontroller according the assemble drawings
5.Lay galvanized plates on the cable,use the rivets to fix the galvanized plates
6.After paVlng the laminate flooring ,the geolhermal heating Can be put in to use.